Sticking the .car file I'm using for the C7 here in case anyone has any suggestions. The power is way over the 170bhp it should have and the tires are fairly close to slicks but C7's have had every kind of power unit stuck in them, there were even a few 4x4 ones made. One here in Ireland had the running gear from a 320bhp sierra cosworth 4x4
. I'll be staying as close to standard as I can for the default cars.
Code:
drive = RWD
version = 2
[ steering ]
max-angle = 28.94
[ engine ]
position = 0.0, 1.42, 0.24
mass = 110.0
max-power = 2.75e5
peak-engine-rpm = 8600.0
rpm-limit = 9000.0
inertia = 0.15
idle = 0.02
start-rpm = 1000
stall-rpm = 500
fuel-consumption = 1e-9
torque-friction = 0.0003
torque-curve-00 = 1000, 140.0
torque-curve-01 = 2000, 149.14
torque-curve-02 = 2200, 145.07
torque-curve-03 = 2500, 167.78
torque-curve-04 = 3000, 189.50
torque-curve-05 = 3300, 232.19
torque-curve-06 = 4000, 229.50
torque-curve-07 = 4500, 226.77
torque-curve-08 = 5600, 252.19
torque-curve-09 = 5800, 250.83
torque-curve-10 = 6000, 248.12
torque-curve-11 = 6100, 257.61
torque-curve-12 = 6200, 266.42
torque-curve-13 = 6300, 272.53
torque-curve-14 = 6500, 278.92
torque-curve-15 = 6700, 285.92
torque-curve-16 = 7000, 290.24
torque-curve-17 = 7600, 285.49
torque-curve-18 = 8000, 280.39
torque-curve-19 = 8200, 275.04
torque-curve-20 = 8300, 265.43
torque-curve-21 = 9200, 250.43
[ clutch ]
sliding = 0.27
radius = 0.15
area = 0.75
max-pressure = 15400.0
[ transmission ]
gears = 6
gear-ratio-r = -2.96
gear-ratio-1 = 2.30
gear-ratio-2 = 1.81
gear-ratio-3 = 1.49
gear-ratio-4 = 1.22
gear-ratio-5 = 1.08
gear-ratio-6 = 0.96
shift-delay = 1.2
[ differential ]
final-drive = 3.97
anti-slip = 280.0
[ fuel-tank ]
position = -0.17, -0.26, -0.56
capacity = 40.0
volume = 40.0
fuel-density = 1.0
[ suspension-front ]
spring-constant = 50000
bounce = 2400
rebound = 2600
travel = 0.9
max-compression-velocity = 100
camber = -1.33
caster = 6.12
toe = 0.0
anti-roll = 8000
[ suspension-rear ]
spring-constant = 40000
bounce = 1800
rebound = 2000
travel = 0.9
max-compression-velocity = 100
camber = -0.45
caster = 0.28
toe = 0.0
anti-roll = 6000
[ tire-front ]
radius = 0.325
rolling-resistance = 1.3e-2, 6.5e-6
rotational-inertia = 1.4
tread = 0
# Lateral force
a0=1.55
a1=-40
a2=1800
a3=3200
a4=7.2
a5=0.014
a6=-0.24
a7=1.0
a8=-0.03
a9=-0.0013
a10=-0.15
a111=-8.5
a112=-0.29
a12=17.8
a13=-2.4
# Longitudinal force
b0=1.65
b1=-80
b2=1900
b3=23.3
b4=390
b5=0.05
b6=0
b7=0.055
b8=-0.024
b9=0.014
b10=0.26
# Aligning moment
c0=2.2
c1=-4.1
c2=-4.2
c3=-1.8
c4=-9.1
c5=0.0225
c6=0
c7=0.044
c8=-0.58
c9=0.18
c10=0.043
c11=0.048
c12=-0.0035
c13=-0.18
c14=0.14
c15=-1.029
c16=0.27
c17=-1.1
[ tire-rear ]
radius = 0.340
rolling-resistance = 1.3e-2, 6.5e-6
rotational-inertia = 1.6
tread = 0
# Lateral force
a0=1.55
a1=-55
a2=1800
a3=3200
a4=7.2
a5=0.014
a6=-0.24
a7=1.0
a8=-0.03
a9=-0.0013
a10=-0.15
a111=-8.5
a112=-0.29
a12=17.8
a13=-2.4
# Longitudinal force
b0=1.65
b1=-110
b2=1900
b3=23.3
b4=410
b5=0.075
b6=0
b7=0.055
b8=-0.024
b9=0.014
b10=0.26
# Aligning moment
c0=2.2
c1=-4.3
c2=-4.4
c3=-1.9
c4=-9.6
c5=0.0225
c6=0
c7=0.044
c8=-0.58
c9=0.18
c10=0.043
c11=0.048
c12=-0.0035
c13=-0.18
c14=0.14
c15=-1.029
c16=0.27
c17=-1.1
[ brakes-front ]
friction = 0.73
max-pressure = 2.5e6
bias = 0.61
radius = 0.17
area = 0.015
[ brakes-rear ]
friction = 0.73
max-pressure = 2.5e6
bias = 0.39
radius = 0.14
area = 0.015
handbrake = 1
[ driver ]
position = -0.208, -0.57, -0.1
mass = 90.0
view-position = -0.208, -0.57, 0.3
hood-mounted-view-position = 0.0, 0.24, 0.12
[ drag ]
position = 0.0, 0.0, 0.2
frontal-area = 2
drag-coefficient = 0.3
[ wing-front ]
position = 0.0, 1.9, 0.60
frontal-area = 0.2
drag-coefficient = 0.0
surface-area = 0.3
lift-coefficient = -0.5
efficiency = 0.95
[ wing-rear ]
position = 0.0, -2.14, 0.37
frontal-area = 0.05
drag-coefficient = 0.0
surface-area = 0.5
lift-coefficient = -2
efficiency = 0.95
[ wheel-FR ]
position = 0.63, 1.19, -0.43
roll-height = 0.325
mass = 12
restitution = 0.1
[ suspension-FR ]
position = 0.58, 1.19, -0.07
hinge = -0.63, 1.19, -0.7
[ wheel-FL ]
position = -0.63, 1.19, -0.43
roll-height = 0.325
mass = 12
restitution = 0.1
[ suspension-FL ]
position = -0.58, 1.19, -0.07
hinge = 0.63, 1.19, -0.7
[ wheel-RR ]
position = 0.65, -1.17, -0.43
roll-height = 0.340
mass = 15
restitution = 0.1
[ suspension-RR ]
position = 0.60, -1.17, -0.07
hinge = -0.65, -1.17, -0.7
[ wheel-RL ]
position = -0.65, -1.17, -0.43
roll-height = 0.340
mass = 15
restitution = 0.1
[ suspension-RL ]
position = -0.60, -1.17, -0.07
hinge = 0.65, -1.17, -0.7
# these are used to calculate the weight distribution and balance
[ particle-00 ]
mass = 10.0
position = 0.0, -1.35, -0.47
[ particle-01 ]
mass = 20.0
position = 0.0, 0.96, -0.47
[ particle-02 ]
mass = 75.0
position = 0.5, -1.3, 0.09
[ particle-03 ]
mass = 75.0
position = -0.5, -1.3, 0.09
[ particle-04 ]
mass = 75.0
position = 0.45, 1.6, -0.13
[ particle-05 ]
mass = 75.0
position = -0.45, 1.6, -0.13